Yes—there are urban trash cans that fit standard 55-gallon liners, but you have to match the can to the liner, not just the capacity. A lot of streetscape receptacles and commercial outdoor cans are designed around a 55-gallon drum liner, especially concrete or steel models with a rigid inner liner, a bag ring, and a top opening that lets the bag drape over the rim. Common 55-gallon liners run around 38 x 58 inches or 40 x 56 inches, so a can with a roughly 22–24 inch opening and a straight or slightly tapered body is usually the easiest fit.
That said, “55-gallon can” and “fits a 55-gallon liner” aren’t the same promise. Capacity tells you volume; liner fit depends on opening shape, interior height, taper, venting, and how the lid or side openings interact with the bag. A slim square urban can, a can with a narrow top, or one with an aggressive taper may technically hold 55 gallons but still be awkward for a standard liner. You may get a loose fit, a bag that tears at the corners, or not enough overhang to tie.
The safest approach is to look for listings that explicitly say “55-gallon liner compatible,” “uses 55-gallon drum liners,” or “includes bag ring.” Check the liner dimensions the manufacturer recommends, and confirm whether they mean a flat or star-seal bag. For daily street use, a 1.5–2 mil liner is common; go heavier if the can collects glass, sharp food waste, or construction debris. Before buying a set, test one can with the exact liners you plan to use. If the bag goes in easily, drapes 2–3 inches over the rim, and stays put when the lid closes, you’ve got a good fit.