Honestly, I’d start by avoiding anything that just says “stainless steel” without a grade. In salt air, 304 stainless and mild steel are the usual disappointments. For urban waste bins that need to look good and survive public use, 316L marine-grade stainless steel is the gold standard—especially with passivated welds, 316 fasteners, and good drainage. If it is powder-coated, the coating has to be marine-grade and properly pretreated; chips and scratches are where corrosion starts.
For a low-maintenance beachfront or park, UV-stabilized HDPE bins often hold up best. They won’t rust, they resist salt spray, and they are easy to hose out. The catch is UV fade and physical damage, so choose thick walls, molded-in color, and replaceable liners. Powder-coated aluminum is a good middle ground for design-heavy streetscapes, but I’d insist on marine-grade pretreatment and stainless hardware. Concrete can work, but salt can cause spalling and rebar corrosion if it is not sealed and detailed well.
So my practical pick: 316L stainless steel for high-visibility coastal promenades and transit stops; HDPE for beachfront parks and low-maintenance sites; coated aluminum for custom urban design. Avoid galvanized or mild-steel bodies, mixed-metal fasteners, and bases that trap water. Also plan on rinsing and inspecting hinges, latches, and feet—salt air is relentless, and the small hardware usually fails first.