Assembling your new urban trash can is straightforward. First, unpack all parts from the box and lay them on the floor. You should have the main body, a lid, a pedal mechanism, and usually four wheels with bolts. Start by flipping the main bin upside down. Attach the wheels to the base by screwing them into the pre-drilled holes—hand-tighten first, then use the included wrench to secure them firmly. Next, turn the bin right-side up. The most important step is connecting the lid to the body using the hinge pins provided. Align the holes on the lid with those on the bin's back and insert the pins until they click into place. Finally, attach the foot pedal to the front bottom of the can. It typically hooks onto a bar and is secured with a small bolt. Press the pedal a few times to ensure the lid opens and closes smoothly. That's it! Your trash can is ready for use. Remember to check all connections are tight to prevent wobbling. If you encounter issues, refer to the model-specific diagram that came in your box.
How do I assemble this particular model of urban trash can?
If you have any different opinions or need to consult us further, please pay attention or send us an email. We will reply to each of you individually! Thank you for your support and trust!